SIMATIC S7-1500 SM 534 analog input/output modules 6ES7534-7QE00-0AB0

Overview of I/O Moduls

I/O modules are the interface between the SIMATIC S7-1500 and the process:

• Digital and analog modules provide exactly the inputs/outputs required for each task.
• Technology modules for SIMATIC S7-1500 and ET 200MP
  • With integrated functions for high-speed counting and position detection
  • With integrated inputs and outputs for tasks at the process level, and short response times
• Communication modules for SIMATIC S7-1500 and ET 200MP
  • For data exchange using point-to-point coupling
  • For connecting to PROFIBUS
  • For connecting to Industrial Ethernet
• Connection system for user-friendly, low-overhead wiring of the S7-1500 and ET 200MP modules

Application of S7-1500 SM 534

Analog inputs record process signals such as pressure or temperature and forward them in digitalized format (16-bit format) to the control. They are suitable for the measurement of current (2-wire and 4-wire transmitters), voltage, and resistance, as well as for the connection of resistance thermometers and thermocouples (measurement types depend on the module).

Analog outputs convert a 16-bit digital value into a current or a voltage and output this to the process. They are suitable, for example, for controlling proportional valves or small servo drives.

The following analog input/output module is available:

• AI/AQ 4xU/I/RTD/TC / 2xU/I ST
  4 analog input channels;
  16 bit resolution; accuracy +/-0.3%; one potential group; 10 V common mode voltage; parameterizable diagnostics; hardware interrupts (two upper and lower limit values); calibration during execution time.
  2 output channels;
  16 bit resolution; accuracy +/-0.3%; one potential group; parameterizable diagnostics; parameterizable substitute values for the outputs; calibration during execution time.
  Module width 25 mm