ISE1 Pressure Switch 1 or 2 Outputs with Analog LED Indicator

ISE1 is a basic pressure switch with digital output and optional analog
voltage output. The ISE1 monitors the pressure of any non-corrosive,
non-flammable gas. Low and high pressure ranges are offered, as well as
metric or NPTF male thread connections. Rotary trimmers adjust the switch
set point and variable hysteresis if 1 output, or two set point trimmers if
2 output. A red/green LED indicator also lights when the output signal is
ON. Electrical connections include a 3 wire grommet cable or 4 wire
snap-in connector. ISE1 is CE and RoHS compliant, with an IP40 enclosure
rating.

– Basic pressure switch with rotary adjustment of digital outputs, plus
1-5V output
– Positive pressure range: 0 to 100kPa, 0 to 1 MPa
– Output options: 1 or 2 signal outputs (NPN or PNP), with or without
analog voltage
– Power supply requirement: 12 to 24 VDC
– Repeatablility: ±1% of F.S.
– Port sizes: 1/8 Rc or 1/8 NPTF male,(incl. M5x0.8 female)

Download ISE1 Datasheet by click the link Datasheet.